Segment Routing over IPv6 (srv6) Configuration Module¶
This configuration module configures SRv6 over IS-IS and (optionally) BGP on Nokia SR OS.
Supported SRv6 features:
End SIDs (nodes) and End-x SIDs (links), all statically allocated
IS-IS routing protocol with SRv6 TLVs
Dynamic BGP Service SIDs
The module currently depends on IS-IS module and will trigger a configuration error if the isis module is not enabled in the network topology.
Locator: an IPv6 address range to allocate to SRv6 nodes; each node is assigned a unique /64 prefix from this range
We want to create a four-router SRv6 network.
All devices run IS-IS and SRv6:
module: [ isis, srv6 ]
We want to use unnumbered P2P interfaces and dual-stack deployment with IPv6 configured on loopback addresses:
addressing: p2p: unnumbered: true loopback: ipv6: 2001:db8:cafe::/48 srv6.locator: 2001:db8:aaaa::/48 # Must not overlap with interfaces
provider: clab defaults.device: sros # Type must support FP4 chipset nodes: e1: e2: c1: c2:
The devices are connected into a square topology:
links: - e1-c1 - e1-c2 - e2-c1 - e2-c2