Groups of Lab Devices (Nodes)¶
Network devices (nodes) used in a virtual lab are automatically grouped into platform-specific groups like iosv or nxos. You can use these groups or custom groups to:
Set node attributes or Ansible group variables
Set device type or configuration modules for a set of devices
Attach additional configuration templates to a set of devices
Limit the scope of netlab commands that invoke Ansible playbooks.
For example, you could use netlab config mpls.j2 --limit iosv to deploy configuration specified in Jinja2 template mpls.j2 only on Cisco IOSv devices.
Table of Contents
Custom Node Groups¶
Virtual lab topology can specify additional (custom) device groups in the groups top-level parameter. The groups parameter must be a dictionary with group names as dictionary keys. Dictionary values could be either a list of member nodes or a further dictionary specifying members:
---
defaults.device: iosv
nodes: [ a,b,c,d,e,f ]
groups:
g1: [ a,b,c ]
g2:
members: [ d,e,f ]
The custom node groups are used to create additional groups in Ansible inventory file. You can use custom node groups in any netlab command that invokes an Ansible playbook.
For example, netlab config mpls.j2 --limit g1 would deploy configuration template mpls.j2 only on lab devices A, B and C.
Special Group Names¶
The following groups have special meaning in netlab-generated Ansible inventory:
unprovisioned: netlab up and netlab initial will skip devices in this group while deploying device configurations.
Custom Configuration Templates¶
You can building complex labs with functionality that is not yet part of netlab with the help of netlab config command that deploys custom configuration template to a set of lab devices.
To make the deployment of custom configuration template(s) part of a regular lab creating process1, use config group attribute that can specify either a single template or a list of templates.
For example, to deploy ospf-anycast-loopback.j2 template on members of anycast group and mpls-ldp.j2 on all devices in your lab during the netlab up process, use the following topology file:
defaults:
device: iosv
groups:
anycast:
members: [ a1, a2, a3 ]
config: [ ospf-anycast-loopback.j2 ]
all:
config: [ mpls-ldp.j2 ]
nodes: [ l1, l2, l3, s1, a1, a2, a3 ]
The config parameter can also be specified on individual nodes, for example:
defaults:
device: cumulus
module: [ ospf ]
nodes:
s1:
s2:
s3:
config: [ something-special.j2 ]
links: [ s1-s2, s2-s3 ]
Tip
A netlab config command is executed by netlab up process for every template in every config parameter, regardless of whether it’s specified on a group or a node. Excessive use of config parameters might thus result in slower lab deployment.
Setting Node Data in Groups¶
Sometimes you’d like to set a node attribute for all members of a group. For example, in a BGP anycast scenario we should set bgp.advertise_loopback to false on all anycast server – they should advertise only the anycast prefix not individual loopback prefixes.
While it’s perfectly OK to set the desired attribute(s) on individual nodes, it’s much more convenient to set them in a group definition – you can use any valid node attribute (including configuration module node attributes2) in group definitions3.
The node group attribute will be set on all members of the group. The data is deep-merged with the existing node data – for example, you could set bgp.advertise_loopback attribute in group definition without affecting bgp.as node attribute4.
Using this functionality, a BGP anycast topology file becomes much more concise than it would have been otherwise:
defaults:
device: iosv
module: [ bgp, ospf ]
bgp.as: 65000
groups:
anycast:
members: [ a1, a2, a3 ]
bgp.as: 65001
bgp.advertise_loopback: false
nodes: [ l1, l2, l3, s1, a1, a2, a3 ]
Using Group Node Data with VRFs and VLANs¶
VRFs and VLANs mentioned in vrfs or vlans group attributes will be defined as global (topology-wide) VRFs/VLANs. The VLAN ID/VNI or VRF RT/RD values will be copied from vlans/vrfs into global vlans/vrfs. As every VLAN needs a unique ID/VNI (likewise for VRF RT/RD), you cannot define different ID/VNI or RT/RD values for the same VLAN/VRF in different groups.
Example:
module: [ vlan,ospf ]
groups:
g1:
members: [ r1, r2 ]
vlans:
red:
ospf.cost: 10
blue:
ospf.cost: 20
nodes: [r1, r2]
links:
- r1:
r2:
vlan.trunk: [ red, blue ]
The above topology will:
Create topology-wide red and blue VLANs.
Auto-assign VLAN ID and VNI to those VLANs.
Copy group vlans into R1 and R2 (setting OSPF cost for VLAN interfaces)
Merge the global vlans definitions into nodes.r1.vlans and nodes.r2.vlans, ensuring the VLANs on R1 and R2 have the correct VLAN ID/VNI.
Tip
As the group VLANs/VRFs are copied into all nodes in a group, you’ll get all VLANs/VRFs (and VLAN interfaces) mentioned in group definition defined on all group members regardless of whether they actually use those VLANs/VRFs.
Setting Device Type or List of Modules in Groups¶
You can set node device type (device attribute) or the list of configuration modules (module attribute) in group definitions, but only on groups with static members.
Device type is copied from groups to nodes that have no explicit device type. Modules listed in a group are added to modules already enabled on group members. The merging of node- and group modules takes precedence over the global (topology-level) list of modules.
The following example uses this functionality to use Cumulus VX on routers advertising anycast IP address, and to use BGP as the only configuration module on those devices.
defaults.device: iosv
module: [ bgp, ospf ]
bgp.as: 65000
groups:
anycast:
members: [ a1, a2, a3 ]
module: [ bgp ]
device: cumulus
bgp.as: 65001
bgp.advertise_loopback: false
nodes: [ l1, l2, l3, s1, a1, a2, a3 ]
Notes:
BGP module specified in the anycast group is added to the list of modules specified on the group members. No group members have an explicit module definition, resulting in
module: [ bgp ]being set on A1, A2, and A3.Device type specified in the anycast group is copied into A1, A2, and A3.
Default device type specified in defaults.device is copied into nodes that still have no device type (L1, L2, L3, S1)
Default list of modules (
module: [ bgp, ospf ]) is copied into nodes that still have no module attribute (L1, L2, L3, S1).
Group Variables¶
Group definition could include group inventory variables in the vars element. Group variables are a dictionary of name/value pairs:
---
defaults.device: iosv
nodes: [ a,b,c,d,e,f ]
groups:
g1: [ a,b,c ]
g2:
members: [ d,e,f ]
vars:
x1: 1
x2: 2
Group variables are stored in group_vars directory when netlab create creates an Ansible inventory from the topology file. They can be used as normal Ansible group variables, for example in a Jinja2 template specified in netlab config command.
Changing Group Variables for Predefined Groups¶
If you want to set one or more Ansible facts for all devices in your lab, use vars element in all group:
defaults.device: cumulus
nodes: [ a,b,c ]
groups:
all:
vars:
http_server: true
To make the definition a bit more concise, use the netlab hierarchical attribute names:
defaults.device: cumulus
nodes: [ a,b,c ]
groups.all.vars.http_server: true
You could also change group variables for auto-created platform groups. For example, to change the default username Ansible uses to connect to Cumulus VX nodes, use:
defaults.device: cumulus
nodes: [ a,b,c ]
groups.cumulus.vars.ansible_user: other
Automatic BGP Groups¶
BGP module creates a group named asnnn where nnn is the AS number for every BGP AS present in the lab topology. The members of the group are all nodes in that autonomous system.
You can set inventory variables (with vars attribute), deployment templates (with config attribute) or node data (with node_data attribute) on an automatic BGP group, but you cannot specify static group members.
Here is a BGP anycast topology file that depends on setting node data within an automatic BGP group (the topology file uses BGP as-list functionality to specify AS membership):
defaults:
device: iosv
module: [ bgp, ospf ]
bgp:
as_list:
65000:
members: [ l1, l2, l3, s1 ]
rr: [ s1 ]
65001:
members: [ a1, a2, a3 ]
groups:
as65001:
node_data:
bgp.advertise_loopback: false
nodes: [ l1, l2, l3, s1, a1, a2, a3 ]
Specifying Groups in Nodes¶
You could specify a group or a list of groups a node belongs to in the group attribute of a node instead of specifying group members in groups topology. You can also combine the two ways of defining groups, for example:
defaults:
device: cumulus
nodes:
a:
group: [ g2 ]
b:
c:
d:
e:
group: [ g2, g3 ]
f:
group: g1
groups:
g1: [ a,b,c ]
g2:
vars:
x1: 1
x2: 2
The above topology file:
Creates two groups (g1 and g2) from the groups element.
Adds nodes A and E to group g2. The members list is automatically created when the first node is added to the group.
Adds node E to group g3. The group is automatically created the first time it’s encountered in a node group list.
Adds F to group g1. Please note that the group node attribute could be a string or a list of strings.
The final value of the groups element is thus:
groups:
g1:
members:
- a
- b
- c
- f
g2:
members:
- a
- e
vars:
x1: 1
x2: 2
g3:
members:
- e
Hierarchical Groups¶
netlab supports hierarchical groups – groups could be members of other groups, for example:
nodes: [ a,b,c,d,e,f ]
groups:
g1:
members: [ a,b ]
g2:
members: [ d,g1,g3 ]
g3:
members: [ e ]
The hierarchical groups specified in a lab topology file are directly translated into Ansible inventory groups. The above example will generate the following data structure for group g2 in Ansible inventory file:
g2:
children:
g1: {}
g3: {}
hosts:
d: {}
Node Data in Hierarchical Groups¶
When faced with a group hierarchy, node_data processing takes great care to use the node values specified in the most-specific group. Continuing the previous example, now with node_data:
groups:
g1:
members: [ a,b ]
g2:
members: [ d,g1,g3 ]
node_data:
foo: bar
g3:
members: [ e ]
node_data:
foo: baz
Nodes a, b and d (direct and indirect members of group g2) will have the node attribute foo set to bar.
Node e (member of group g3) will have the node attribute foo set to baz – g3 overwrites the foo value set by the parent group g2.
node_data processing performs deep dictionary merge when an attribute specified in the group node_data and the current value of node attribute are both dictionaries, allowing you to specify various parts of the same dictionary in different groups, for example:
nodes:
a:
bgp:
rr: true
b:
c:
d:
e:
config: [ e ]
f:
groups:
g1: [ a,b ]
g2:
members: [ d,g1,g3 ]
node_data:
bgp:
as: 65000
g3:
members: [ e ]
node_data:
bgp:
as: 65001
Node a has bgp.rr set to True (direct node data) and bgp.as set to 65000 (attribute merged from g2 node data).
Nodes b and d have bgp.as set to 65000.
Node e has bgp.as set to 65001 (deep merge results in value from g2 being overwritten by value from g3).
Nodes c and f do not have any BGP-related attributes
Custom Configuration Templates in Hierarchical Groups¶
Custom configuration templates for individual nodes are built from configuration templates of all parent groups (starting with the least-specific parent group) plus node configuration templates. When using the following topology file…
nodes:
a:
config: [ a ]
b:
c:
d:
e:
config: [ e ]
f:
groups:
g1: [ a,b ]
g2:
members: [ d,g1,g3 ]
config: [ g2a, g2b ]
g3:
members: [ e ]
config: [ g3 ]
… individual nodes get the following configuration templates:
| node | template |
|---|---|
| a | g2a, g2b (from g2 via g1), a (from a) |
| b | g2a, g2b (from g2 via g1) |
| c | none (it's not a member of any group) |
| d | g2a, g2b (from g2) |
| e | g2a, g2b (from g2 via g3), g3 (from g3) |
| f | none (it's not a member of any group) |
If you want to remove one or more templates specified by parent groups from a node or a group, use -x to remove a specific parent template from the list or - to remove all parent templates, for example:
nodes:
a:
config: [ -g2b, a ]
b:
config: [ -, b ]
c:
d:
e:
config: [ -g1, e ]
f:
groups:
g1: [ a,b ]
g2:
members: [ d,g1,g3 ]
config: [ g2a, g2b ]
g3:
members: [ e ]
config: [ g3 ]
The following configuration templates would be applied to individual nodes in the above lab topology:
| node | template |
|---|---|
| a | g2a (from g2 via g1, g2b removed), a (from a) |
| b | all parent templates removed, b (from b). |
| c | none (it's not a member of any group) |
| d | g2a, g2b (from g2) |
| e | g2a, g2b (from g2 via g3), g3 (from g3), -g1 is ignored, e (from e) |
| f | none (it's not a member of any group) |
- 1
… once your configuration templates are thoroughly tested ;)
- 2
If a group definition contains module attribute, you cannot set attributes for modules not listed in the module attribute in the group definition.
- 3
Node attributes were stored in node_data group attribute prior to netlab release 1.4. Starting with release 1.4, you can continue using node_data dictionary or set node attributes directly in group definitions.
- 4
In a topology with hierarchical groups, attributes from the innermost groups take precedence. Node attributes from groups with static members have have precedence over node attributes from BGP-generated groups